Remote Control Setting Blinds WiFi & Zigbee Click to view PDF https://tinyurl.com/Blinds-wifizigbee read more

Remote Control Setting Blinds Non-WiFi Click to view PDF https://tinyurl.com/Blinds-nonwifi To change the upper & lower limit of this motorised blind, please refer to contents below.  Allen Key Wand - For turning the limit key at motor  (Allen Key Wand included for each order)  Please do not use other item to turn the limit key as this may cause damage.  Turning either limit key with the wand clockwise reduces the travel of the blind Turning either limit key with the wand counter-clockwise increases the travel of the blind. While operating the blind upwards to adjust upper limit, kindly make sure the bottom bar not hitting the tube, as this may cause damage. While operating the blind downwards to adjust lower limit, please do not roll the fabric completely from the tube, as this may cause damage.    Exact methods to adjust upper & lower limits for this motorised blind.    MOTOR AT LEFT MOTOR AT RIGHT NORMAL ROLL Upper Limit Key: BOTTOM Lower Limit Key: TOP Upper Limit Key : BOTTOM Lower Limit Key : TOP REVERSE ROLL Upper Limit Key: TOP Lower Limit Key: BOTTOM Upper Limit Key: TOP Lower Limit Key: BOTTOM Normal Roll (Fabric rolls at the side nearer to window), motor at right CASE 1: Adjust upper limit to higher position 1.1 The upper limit key is at the bottom  1.2 Use Allen Key Wand to turn the key counter-clockwise 1.3 The upper limit will be higher gradually until user stop turning 1.4 Make sure the bottom bar not hitting the tube.  1.5 Use remote control roll down & roll up again to confirm the limit        CASE 2: Adjust lower limit to lower position 2.1 The lower limit key is at top 2.2 Use Allen Key Wand to turn the key counter-clockwise 2.3 The lower limit will be lower gradually until user stop turning 2.4 Do not roll out the fabric completely from the tube 2.5 Use remote control roll up & down again to confirm the limit read more

To Use the App 1. Add Device: Connect to WiFi 2.4GHz, turn on bluetooth & location. Next, turn on motor. Choose ''Add'' after devices found, confirm WiFi information correct and click ''Next''. After device added, click on ''Pencil'' icon, user can rename and assign device to a room, then choose ''Done'' when it's completed. Rename, assign device to room, add/ delete room can also be done any time after device added.     1.1 The device not added, what should user do? Get the motor to enter pairing mode (video guide below) Press the reset button on the motor 4 times continously, at the 5th time, press & hold for about 3 seconds, motor rotate once at about first second, motor rotate another time at about third second. It means the motor entered pairing mode and ready to be added to the App.  Confirm again WiFi 2.4GHz available, WiFi name and password correct, location & Bluetooth turned on user's phone, then follow the complete procedure as stated in step 1.     2. Rename Device and Assign Device to A Specific Room: User can rename all their blinds freely and assign devices to specific rooms.     3. Create Tap-to-Run:  Tap-to-Run is a ''shorcut button'' in App, for user to tap on it to control blinds.       3.1 Tap-to-Run Specific Position: Create a Tap-to-Run for specific blind positions, in percentage.       4. Create Widget in Android & iOS: The main purpose of a control widget is to display App functions, so that user can control blinds from home screen without having to open the app.      5. Add Schedule: Tap on blind in the App. Select Setting then Timer. Tap Add. User can freely to set a time for the blind to open or close, or set a time for the blind to open to a certain position.   6. Create Automation: Preset condition(s), so blinds & other devices can be automated. For example, the blind closes on hot sunny day, or the blind opens up when it's raining.       Link to Google: Link Sanse Smart App to Google, used for set up voice control & automation/ routine in Google Home App.      Create Automation in Google Home App: After set up, user can configure automation for Sanse Smart devices to work with devices of other Apps. In this video, we only show the method to create automation for devices of Sanse Smart.      Enquiries about the App  Please contact us through WhatsApp, click here read more

To Use the App 1. Add Device: Turn on motor, make sure indicator light blinks continuously. Choose ''+ and Add Device''. Enter WiFi name and password correctly and click ''Next''. Select ''Confirm the indicator is blinking and Next''. After device found, click on ''Pencil'' icon, user can rename and assign device to a room, then choose ''Done''.     1.1 The device not added, what should user do? Get the motor to enter pairing mode (video guide below) Press the P2 button once, it's at the back of remote control, then press open once & stop once, indicator blinks continuously and ready to be added to App. Confirm again WiFi 2.4GHz available,location access turned on user's phone, WiFi name and password correct, then follow the complete procedure as stated in step 1.       2. Rename Device: User may rename all their devices.     3. Create Tap-to-Run: Tap-to-Run is a ''shorcut button'' in App, for user to tap on it to control device.   4. Create Widget (iOS & Android): A control widget is used to display App functions so that the user can control device from home screen without having to open the App.     -     -   5. Link to Google: Link Sanse Smart App to Google, used for voice control & automation in Google Home App.   6. Create Google Home Automation: After set up, user can configure automation for Sanse Smart devices to work with devices of other Apps or brands. In this video we only show the method to create automation for devices in Sanse Smart.   Enquiries about the App  Please contact us through WhatsApp, click here read more

To Use The App 1. Add Device: Connect to WiFi 2.4GHz, turn on bluetooth & location, press & hold Set2 button, until Set1 indicator light blinks continuously. Choose ''Add'' after devices found, confirm WiFi information correct and click ''Next''. After device added, click on ''Pencil'' icon, user can rename and assign device to a room, then choose ''Done'' when it's completed. Rename, assign device to room, add/ delete room can also be done any time after device added. User can control the device by using control panel as shown in this video.      2. Rename Device:  User can edit device name freely.  3. Use control panel: Open control panel to control device, in list view or grid view For full blackout, tap on close and wait for the shade to be fully closed, then adjust curtain position to 0% or 100%. 4. Assign device to a specific room: User can assign device to a room, and also add room or delete room.   5. Create Tap-to-Run: Tap-to-Run is ''shorcut-button'' in App. If the created tap-to-runs not needed, user can delete and recreate.   For full blackout, please tap ''Close'' and wait for the shade to befully closed, then tap ''Blackout Right'' or Blackout Left''.     6. Create Automation: Preset condition(s), so blinds & other devices can be automated. Example, the blind opens every day on 7:40am. 7. Create Widget in Android and iOS Phones: The main purpose of a control widget is to display App functions, so that user can control blinds from home screen without having to open the app   8. Link to Google: Link Sanse Smart App to Google, used for set up voice control & automation/ routine in Google Home App 9. Create Automation/ Routine in Google: After set up, user can configure automation/ routine for Sanse Smart devices to work with devices of other Apps. In this video, we only show the method to create automation/ routine for devices of Sanse Smart.   Enquiries about the App  Please contact us through WhatsApp, click here read more